Blais Electric
Smoke & Carbon Monoxide Alarm Installation in Guelph, Kitchener, Waterloo & Cambridge
Prioritizing People, Energizing Spaces
Smoke and carbon monoxide alarms give you early warning when every second counts. Our licensed electricians install, replace, and interconnect alarms so your home meets Ontario safety code and your family is protected. Over 750 reviews with a 4.9 star rating.
-

4.9-Star Rating · 800+ Reviews
-

A+ BBB Accredited
-

Award-Winning
-

Licensed & Insured · ESA #7009865
-

Locally Owned Since 2013
-

Serving Guelph, Kitchener, Waterloo & Cambridge
Trusted Smoke & Carbon Monoxide Alarm Installation Across Guelph & the Tri-Cities
Blais Electric installs, replaces, and upgrades smoke and carbon monoxide alarms for homes across Guelph, Kitchener, Waterloo, and Cambridge. Smoke and carbon monoxide alarms give you warning when every second matters. They only do that when they are the right type, in the right place, and installed to code.
In Ontario that is not optional, and most homes we walk into have at least one alarm past its replacement date. If yours is chirping, or you are not sure how old it is, it is worth a look.
Check of your existing alarms, their placement, and their manufacture dates
Hardwired smoke and CO alarms with battery backup
Interconnection so when one sounds, they all sound
Placement that meets Ontario code and local requirements
Troubleshooting for chirping, false alarms, and units that have failed
One itemized quote, no hidden fees, no surprises
Smoke & Carbon Monoxide Alarm Services in Guelph, Kitchener, Waterloo, and Cambridge
From a single alarm replacement to a fully interconnected system, here is the range of smoke and carbon monoxide alarm services our licensed electricians provide across Guelph and the Tri-Cities. Every install meets Ontario Electrical Safety Code and local code requirements.
-
Smoke Alarm Installation
Install new smoke detectors in the correct locations to provide reliable early warning throughout your home and be completely compliant with local electrical codes in Guelph, Kitchener, Waterloo, and Cambridge.
-
Carbon Monoxide Alarm Installation
Install CO detectors near sleeping areas and key locations to protect against harmful gas exposure and be completely compliant with local electrical codes in Guelph and the Tri-Cities.
-
Alarm Replacement & Upgrades
Replace outdated or expired alarms, including units older than 10 years, with modern, reliable models.
-
Hardwired Smoke & Carbon Monoxide Detector Installation
Install hardwired smoke and carbon monoxide alarms with battery backup for consistent, long-term performance.
-
Interconnected Alarm Systems
Set up alarms that are connected so when one sounds, they all sound, improving safety throughout the home.
-
Combination Smoke & CO Alarm Installation
Install dual-function units that provide both smoke and carbon monoxide detection in one device.
-
Alarm Troubleshooting & Repairs
Diagnose and resolve issues such as false alarms, chirping units, or alarms that are not functioning properly.
-
New Build & Renovation Alarm Systems
Design and install complete, code-compliant alarm systems for new construction and renovation projects from the ground up.
Smoke & Carbon Monoxide Alarm Requirements in Ontario
In Ontario, homes are required to have:
Smoke alarms on every level of the home
Smoke alarms outside all sleeping areas
Carbon monoxide alarms near sleeping areas in homes with fuel-burning appliances or an attached garage
These alarms must be properly installed, maintained, and tested regularly to ensure they function as intended.
How to Diagnose a Chirping Alarm Before You Call
A chirping or beeping smoke alarm is one of the most common issues homeowners deal with. Before you pick up the phone, there are a few things you can try on your own that may solve the problem.
-
The type of sound your alarm makes tells you a lot about what is going on.
A single chirp every 30 to 60 seconds usually means the battery is low and needs to be replaced.
A chirp every 30 seconds that does not stop on a sealed battery model often means the alarm has reached its end of life and the entire unit needs to be replaced.
Random chirps or brief alarm sounds are typically caused by environmental factors like dust, humidity, steam, or insects.
Continuous loud beeping (three long beeps followed by a pause) means the alarm has detected smoke or carbon monoxide. Treat this as a real emergency until you have confirmed it is safe.
-
Replace the battery. This is the most common fix. Remove the alarm from the bracket (most twist off with a quarter turn), swap in a fresh battery of the correct type, and press the test button to confirm the alarm sounds properly. Make sure the battery is snapped in completely and cannot shake loose.
Reset the alarm. Sometimes the alarm retains an error in its memory even after a new battery is installed. Remove the battery (and disconnect from the wiring harness if hardwired), press and hold the test button for 15 to 30 seconds, then reconnect everything. The unit should chirp once and then stay quiet.
Clean the alarm. Dust and debris can trigger false alarms and chirping. Gently vacuum the outside vents with a soft brush attachment, or use a can of compressed air to blow out the sensing chamber. This should be done at least every six months.
Check for environmental triggers. Steam from cooking or showering, high humidity, temperature swings, and even small insects can trigger nuisance alarms. If your alarm goes off regularly during cooking, it may be too close to the kitchen. The Ontario government recommends relocating the alarm a short distance, using a unit with a hush button, or switching to a photoelectric alarm near kitchens, which are less prone to cooking-related false alarms.
Check the age of the unit. Flip the alarm over and look for the manufacture date on the back. Smoke alarms should be replaced every 10 years, and carbon monoxide alarms every 7 to 10 years. If your alarm is past this date, no amount of troubleshooting will fix it. It needs to be replaced.
-
Every alarm brand and model has slightly different reset procedures, battery types, and chirp patterns. If you are unsure about your specific unit, try this: look up the brand and model number printed on the back of your alarm (common brands include Kidde, First Alert, and BRK), then search for the user manual online or ask an AI tool like ChatGPT or Claude to walk you through the care and troubleshooting steps for that exact model.
-
If you have tried the steps above and your alarm is still chirping, going off randomly, or not responding to testing, it is time to call an electrician. This is especially true if:
You have hardwired alarms and are unsure how to safely disconnect or replace them
Multiple alarms are going off at the same time with no apparent cause
Your alarms are interconnected and you cannot identify which unit is triggering
Your alarms are more than 10 years old and need to be fully replaced
You want to upgrade from battery-only to hardwired, interconnected alarms
Blais Electric can diagnose the issue, replace any expired units, and make sure your entire system is working properly and up to code.
Alarm Systems for Commercial Properties
Blais Electric also installs and maintains smoke and carbon monoxide alarm systems for commercial properties across Guelph, Kitchener, Waterloo, and Cambridge, including offices, retail spaces, and multi-unit buildings. Reliable, code-compliant alarms help protect your staff and customers, reduce risk and downtime, and keep your business in line with local safety requirements. We work efficiently in active business environments to keep disruption to a minimum.
Smoke & Carbon Monoxide Alarm FAQs
-
or carbon monoxide alarm or detector in Guelph, Kitchener, Waterloo, or Cambridge? For a straightforward replacement, cost is mostly the alarm plus a short amount of labour. For hardwired or interconnected alarms, most installations run from about $150 to $400 or more per alarm installed, depending on the type of unit, the wiring involved, and how many alarms you are adding. Replacing several units or wiring a full interconnected system is quoted based on scope. We assess it and give you an honest, itemized quote before we start.
-
Smoke alarms should be replaced every 10 years, and carbon monoxide alarms every 7 to 10 years. Check the manufacture date printed on the back of the unit. If it is past that date, the alarm needs to be replaced no matter how it seems to be working.
-
Yes. In Ontario it is against the law to disable a smoke alarm, including removing the battery to stop it from chirping. Doing so leaves your home unprotected. If an alarm keeps chirping, replace the battery or the unit rather than disabling it, and call us if you cannot resolve it.
-
Ontario requires smoke alarms on every level of the home and outside all sleeping areas, plus carbon monoxide alarms near sleeping areas in homes with fuel-burning appliances or an attached garage. Alarms must be properly installed, maintained, and tested.
-
Both are allowed, but hardwired alarms with battery backup offer the most reliable, long-term protection, and they can be interconnected so that when one sounds, they all sound. If you are renovating or upgrading, hardwired and interconnected is the setup we usually recommend.
-
The most common cause is a low battery, but a chirp that will not stop on a sealed unit often means the alarm has reached the end of its life and needs replacing. Dust, humidity, and steam can also trigger nuisance chirps. See our troubleshooting steps above, and if it keeps chirping after that, give us a call.
-
Yes. We regularly diagnose and replace hardwired and interconnected alarm systems, including identifying which unit is triggering the others, and we make sure the whole system is working properly and up to code.
-
Yes. We install quality, code-approved alarms and stand behind our work, and we explain the warranty details before we begin.
Get in touch
Ready to Protect Your Home?
Whether you are replacing an old alarm or wiring a full interconnected system, we will make sure your home is covered and up to code. Book online in a few minutes or call us to book your job.
Need help now? Call us (226) 605-6040